SX440 Generator AVR (Blue)
- publish： 2019-07-22 16:20 Browse：
- Type： AVR-SX440BIW
- Product Summary：
This module is specially designed for the application scheme of standby power supply, which can automatically monitor the state of electricity, automatically control the starting and stopping of the generator set, and automatically control the switching of dual power supply switch (ATS function); indicate the current working status, relevant parameters and fault content through high-brightness LED and LCD; control work. Energy and so on can be adj...
Product description:
This module is specially designed for the application scheme of standby power supply, which can automatically monitor the state of electricity, automatically control the starting and stopping of the generator set, and automatically control the switching of dual power supply switch (ATS function); indicate the current working status, relevant parameters and fault content through high-brightness LED and LCD; control work. Energy and so on can be adjusted, modified and redeveloped according to the specific requirements of users.
Specifications:
| SX440 Generator AVR-Blue | |||
| Input | Voltage | 190-264V ac | |
| Frequency | 50-60 Hz nominal | ||
| Phase | 1 | ||
| Wire | 2 | ||
| Output | Voltage | max 90V dc at 207V ac input | |
| Current | continuous 4A dc, intermittent 6A for 10 secs | ||
| Resistance | 15 ohms minimum | ||
| Regulation | +/- 1.0% | ||
| Thermal Drift | 0.04% per deg. C change in AVR ambient | ||
| Typical system response | AVR response | 20ms | |
| Filed current to 90% | 80 ms | ||
| Machine Volts to 97% | 300ms | ||
| External voltage adjustment | +/-10% with 1 k ohm 1 watt trimmer | ||
| Under frequency protection | Set point | 95% Hz | |
| Slope | 170% down to 30 Hz | ||
| Unit power dissipation | 12 watts maximum | ||
| Build up voltage | 4 Volts @ AVR terminals | ||
| Analogue Input | Maximum input | ±5V dc | |
| Sensitivity | 1v for 5% | ||
| Input resistance | 1k ohm | ||
| Quadrature Droop Input | 10 ohms burden | ||
| Max. sensitivity: 0.07 A for 5% droop 0PF | |||
| Max. input: 0.33A | |||
| Environmental | Vibration | 20-100 Hz,50mm/se | |
| 100Hz – 2kHz, 3.3g | |||
| Operating temperature | -40 to +70 Deg. C | ||
| Relative Humidity 0-70 Deg. C | 95% | ||
| Storage temperature | -55 to +80 Deg. C | ||
.jpg)
