Introduce

Product：

User manual：

Software Download：

Product description:

Generator AVR R230 is a half-wave phase controlled thyristor type,for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes under speed, and sensing loss protection to ensure safe, reliable control of the generator. Positive voltage build up from residual levels is ensured by the use of proficient semiconductors in the power circuitry of the AVR.the exciter field windings to offer closed loop control of the output voltage with load regulations of +/- 1.5%.

* The regulator monitors the exciter excitation current as a function of the alternator output voltage.

* Very simple in design,the alternator with shunt excitation has no sustaining short-circuit capacity.

* Voltage Regulation:around +/-0.5%

* Voltage supply/sensing range 85 ~139 V (50-60Hz)

* Rapid response time (500 ms) for a transient voltage variation amplitude of ± 20%

* Voltage setting P1
* Stability setting P2.

* Initial potentiometer settings :

1) P1 potentiometer (AVR voltage adjustment): fully anti-clockwise.

2)  Remote voltage adjustment potentiometer: centre position.
Run the alternator at its rated speed. If the voltage does not
increase, the magnetic circuit should be remagnetized (see
section 2.3).

3) Turn the AVR voltage adjustment potentiometer P1 slowly
until the output voltage rated value is obtained.

4) Adjust the stability setting using P2.

5)  Sealed potentiometer P3 is factory set at 48 Hz for 50 Hz