Introduce

Product：

User manual：

Software Download：

1. Summary

ATS106 is an Automatic Transfer Switch Control Module.The module features 32 -Bit microprocessor control.Once mains AC supply failure are detected (under voltage, over voltage), The module will control generator to start . If generator AC can load, The module automatically transfer the switch to generator AC supply.

2. Features

Micro-processor based design;

Meter two single -phase AC Voltages ;  

Set AUTO or MANUAL via PUSH BOTTON mounted on the front panel;

Two isolable N designed ;  

 7 LEDs display the status ;

Operational timers can be altered by PC;  

Control generator to Start.

3. Specification

 DC supply: 8 to 35V(1.5VA) 

Single -phase AC input : AC30～277V (+20%)  50/60Hz

Relay output: 

              Relay of close mains & close gens: 16A 250VAC

              Relay of start generator: 5A 250VAC                           

 Delay timers :

              Mains Normal delay time: 0~3 600s

              Mains Abnormal delay time: 0~3600s

              Gens Normal delay time: 0~3600s

              Start generator time:0~3600s(after Mains is abnormal)

              Stop generator time: 0~3600s(after Mains  is normal)

              Close time:0~20.0s

              Over close time: 0~5.0s

              Between close time: 0~3600s   

 Critical value：

              Mains under voltage: 0~360V

              Mains over voltage:0~360V

              Gens under voltage:0~360V

              Gens over voltage:0~360V

              Gens under frequency : 0~60.0Hz

              Gens over frequency : 51.0~75.0Hz  

 Accessorial input：state can be altered by PC

Operating Temperature Range: -30 to +70℃