Generator intelligent remote monitoring

Introduce

In general, managers usually by various state of generator controller monitors generator, and panel instructions issued by the controller.Controller is our operating management of generator mediation components, so many of the diesel generator for remote monitoring and management, needs to solve three problems, one is the controller must have a data interface, the second is how remote, three is how to centralized management.
First of all, on the computer, the software was used to simulate the controller panel, the interaction of the data management and software, data interface to the controller by the controller.This scenario, the company's LXC6110E controller and the configuration software to realize this function.In this scheme, data center computer service, centralized management of all access to the Internet controller.It around the clock monitoring of generator rev. Stop, oil, oil pressure conditions, and record all kinds of alarm information.Users can start at any time on my computer configuration software to connect to the data center, to see all the current state of the generator, and receive real-time alarm information.

Produce features

1, The feature set
Allows the user to change the parameters set, and the memory block in the internal EEPROM memory, also is not lost in when the system is powered off.Almost all the parameters can be adjusted from the controller front panel, all the parameters can be used to PC through USB interface, and can be adjusted using PC via RS485 interface;There are three groups of maintenance functions, can be set up for the machine maintenance cycle.Maintenance time to action can be set up (warning or alarm stop);
2, Control, protection function
To realize automatic diesel and gas generator starting/stopping, close/brake switch (ATS) and perfect fault display protection function, when multiple warning, warning column will display them in turn, facilitate analysis reason;All outlet for relay output, the output and mainly adopts 16 a relay output, at the same time there are three passive relay output, more convenient for the application of complex;
3, Remote monitoring and control
Has advanced iot functions, through GPRS mobile network and Internet connectivity, in any place can remote monitoring network;As long as there is network, can use mobile phone or PC computer remote monitoring the operation of the generator set data, control the operation of generating set.In addition to basic information monitoring unit, but also can monitor the excitation voltage, electric adjustable output voltage, bearing temperature, winding temperature, etc.

4,Early fault prevention technology
Early failure prevention technology, the computer through the built-in 130 fault model, fuzzy reasoning, timely find various complex early failure.Early failure prevention.But also can increase cloud server failure model of knowledge constantly, achieve the infinite extension diagnosis ability.Historical fault record 200 article, can record the moment in a warning or fault occurring oil pressure, water temperature, voltage, current, power and other important parameters, easy to analysis the reason and repair;
4, a variety of interface connection
All parameters can be to use the computer through USB, RS232 and RS485 interface connection and adjust, within the internal FLASH memory in the controller at the same time, also is not lost in when the system is powered off.

Product parameters
Continuous working voltage DC8.0 V to 35.0 V power supply
The whole machine < 3 w power consumption (standby mode: 2 w or less)
Alternator voltage input:
Three phase four wire 15 V to 360 V AC (ph - N)
Three-phase three-wire 26 V - 620 - V AC (ph ph) -
Single-phase secondary 15 V to 360 V AC (ph - N)
Two phase three line 15 V to 360 V AC (ph - N)
50/60 hz ac generator frequency
2.2-100 Vpp speed sensor voltage Vpp (fengfeng value)
Maximum speed sensor frequency 10000 hz
Starter relay output 16 amp controller power supply voltage output
Fuel supply voltage relay output 16 amp controller output
1 amp 250 vac programmable relay output passive output
2 7 amp 250 vac programmable relay output passive output
3 16 amp 250 vac programmable relay output passive output
4 16 amp 250 vac programmable relay output passive output
Overall dimensions 210 mm x 152 mm x 46 mm
186 mm x 141 mm hole size
Ct (current transformer) secondary current 5 a rating
Working conditions temperature (25 ℃ ~ + 70) humidity: (20 ~ 90) %
Temperature storage conditions: (to 40 ℃ ~ + 85)
IP55 protection grade: when equipped with waterproof rubber ring between controller and the control panel.
IP42: when no add waterproof rubber ring between controller and the control panel.
Object: insulation strength between the input/output/power supply
Reference: IEC688-1992
Test method: AC1.5 kV / 1 min 3 ma leakage current
Weight 0.68 kg
Four, the application characteristics
1, leasing industry applications: management provides the perfect solution: leased out through PC remote management unit, to monitor all operation parameters (pressure, temperature, voltage, current, power, etc.), may at any time change the configuration in order to protect the unit by improper application, which can record 200 detail failure information, including: the fault time, reason, at the time of voltage, current, power, oil pressure, water temperature and other key parameters, and can be uploaded to the monitoring machine at any time.Another item multilevel password management for lease management;v
2, fire pump industry applications: close the electric parameter measurement, using a powerful programmable input/output ports and internal programmable logic to realize automation of water pump control system.Instead of the traditional PLC + simple way of diesel engine controller.Make the system more stable and reliable;
3, the application of air compressor industry: shut down after the voltage measurement protection, according to the need to configure the programmable analog input, using overload protection, cooperate with programmable digital input, complete the start control, temperature and pressure control, protection of parameter Settings, and so on.