Diesel generator(machine oil) power management system

Function introduction

Data acquisition and classification

Stationary generator: (LXI680G)

LXI680G is an industrial-grade GPRS DTU products with GPS global satellite positioning function.The product internal integration with high performance and low power consumption of industrial grade GPS module and GPRS module, GPS global positioning technology and wireless GPRS communication technology perfect combination of a product.

LXI680G platform based on ARM and embedded operating system, built-in industrial-grade module, it can be used in harsh environments, working temperature scope of application can be up to 40 ℃ ~ + 85 ℃.LXI680G provide standard RS232 serial interface, can be quickly and PLC, industrial control, instruments, meters, RTU equipment is linked together, will be linked to LXI680G equipment through GPRS network data transmission to a host on the Internet, realize the transparent data remote transmission, at the same time to the front-end equipment of GPS location information reported to host, achieve the positioning equipment

Wall: installed in the base station

Power management function

Mains, call the alarm function

When the battery voltage reading function

When the battery voltage real read function:

When the temperature reading function

Support dynamic domain name or IP address to access the data center

B: the power management functions;

Collection and generator current value, voltage value, once every four minutes to upload, the generator from the qualitative and quantitative analysis.Whether through the current value of zero determine whether for no-load power generation.

C: security features;

Magnetic door alarm function;

Extensible an infrared or water invasion sensors

Portable generator

Suitable for portable generator data acquisition, installed on the generator

Single-phase generator data collector (LXI980)

Has a variety of data communication interface: USB (the Host), RS232 and RS485, the LINK, CAN (J1939), CAN connect all kinds of international brand generator control module (also in the escalating), each interface is independently programmable, at the same time in the connection of the unit CAN also connect the ATS controller and other equipment, to realize the collection of more data and control;A variety of ways to connect to the Internet (optional) : wired Ethernet, WIFI, 2 g / 3 g / 4 g wireless networks, suitable for all kinds of application scenarios;Note: standalone application is a module monitoring unit, weaver application when a group is a mold piece of monitoring unit;

Suitable for three-phase generator, collection and generator current value, voltage value, once every four minutes to upload, the generator of electricity of qualitative and quantitative analysis.Whether through the current value of zero determine whether for no-load power generation.

Three-phase generator, data collector (LXI980)

Apply to under 30 kw three-phase generator, respectively to collect A and b. and C phase power current value, voltage value, once every four minutes to upload, the generator of electricity of qualitative and quantitative analysis.Through the current value is zero convicted whether for no-load power cut off.Module USES patented technology: with 2-3 times per second the adoption rate of high-speed data acquisition, data at the instant of the failure, the module immediately capture failure data and uploaded to the cloud server, truly realize the remote fault diagnosis, solve the service problems;

High power generator data collector (LXI980)

Suitable for 30 to 50 kw three-phase generator, sampling A, B and C phase power current value, voltage value, once every four minutes to upload, the generator of electricity of qualitative and quantitative analysis.Whether through the current value of zero determine whether for no-load power generation.

The alarm way

The system adopts double channel alarm method

The first passage: text messages

Front-end data acquisition unit is installed on the generator, the data acquisition process of generators, via text message notice six relevant personnel directly, also can be set up via text message to modify, query related parameters (see the message content in attachment),

The second channel: the server

Through GPRS uploaded to the server GuanPing professional network platform, record, inquiry, set and statistical data.Module according to the configuration of the historical data upload interval, uploaded to the server will be collected real-time data, historical data record and query;

The system software function

The latest alarm message

Is currently relevant information, power generator stops generating which information automatically eliminated;

The transient record

Will every 4 minutes related parameters were collected through GPRS uploaded to the monitoring center for data analysis;

Generator scheduling management

where is the power of the generator power generator, the generator in where, whether into the warehouse management

Generator maintenance management

Generator of daily maintenance, maintenance, was idle rate, utilization and management;

Power cost management

Can be calculated according to different pricing methods of fuel, vehicle fee, labor, and can determine whether empty plant to generate electricity.

Base station power management (for fixed generator)

Mains mains to stop time. Call time. Start generating time. End of power generation time. Refresh every four minutes of the current electricity storage pool voltage and temperature.