Introduce

Product：

User manual：

Software Download：

Function Descriptions

   The EG2000A provides both an adjustable idle speed and ramp,for controlling engine smoke,vibration and warm-up.

   Together, the EG2000A Controller, Actuator and MPU (Magnetic Pickup) form the electronic engine governor assembly. The EG2000A receives the signal from the MPU and, depending on the engine RPM, the actuator controls the fuel intake on the engine. The EG2000A receives its power from the engine batteries or an AC to DC power supply rated from 12 or 24 VDC ±20% matching the Actuator voltage. The average operating current is around 2.5 to 3.5 amps, but it may reach 15 Amps during engine start or sudden load changes.

Specifications

Operating Voltage

12 or 24 VDC ±20%

Output Current

0.5 ~ 15 A

Run Speed Adjustment range

Speed adjustment Potentiometer (30 turn)

4 Segment Dip Switch Adjustable From 600 ~ 9500

Hz.

Idle Speed Adjustment Range

Run Speed 30 ~ 85%

Ramp Time

3 ~ 20 Sec

Remote Speed Pot

Ext. Remote speed pot terminal 6, 7, 8 (ILS) and 6,

7, 9 connect a 5KΩ potentiometer ±5% adjustment

range.

Temp. Stability

<0.01%

Run Speed Stability

± 0.25 % at steady state

MPU input signal

1 ~ 120VAC RMS

Droop

4%

Adjustment

Run Speed, Idle Speed,

Ramp Time, Droop, Integration, Gain

Mechanical Vibration

1G @ 18 ~ 30 Hz, 2.5G @ 48 ~ 70 Hz

Relative Humidity

< 95%

Operating Temperature

-40 ~ 85℃

Storage Temperature

-40 ~ 85℃

Dimensions

147mm L * 114mm W * 50mm H

Weight

690g ± 2%