ESD5111 Genset governor
- publish： 2019-07-30 16:22 Browse：
- Type： ESD5111
- Product Summary：
Description Speed Governor ESC5111 is an all electronic device designed to control engine speed with fast and precise response to transient load changes.This closed loop control,when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal,will control a wide variety of engines in an isochronous or droop mode.It is easy to install, adjustable speed and adjustable idle speed, and is protected against reverse ba...
Description
Speed Governor ESC5111 is an all electronic device designed to control engine speed with fast and precise response to transient load changes.This closed loop control,when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal,will control a wide variety of engines in an isochronous or droop mode.It is easy to install, adjustable speed and adjustable idle speed, and is protected against reverse battery voltage, transient pulse voltage, actuator short-circuit fault and loss of speed sensor signal or power supply.
Isochronous Operation/Steady Stability: +/-0.25% or better
Supply: 12 or 24 VDC Battery Systems(transient&reverse voltage protected)
Power Consumption: 50 ma continuous plus acutator current
Maximum Actuator Current at 25celsius(77celsius F): 10 Amps continuous
| PERFORMANCE | |
| Isochronous Operation/Steady State Stability | ± 0.25% or better |
| Speed Range/Governor | 1K-7.5K Hz continuous |
| Speed Drift with Temperature | ± 1% Maximun |
| Idle Adjust CW | Min. 1200Hz. below set speed |
| Idle Adjust CCW | Min. 4100Hz. below set speed |
| Droop Range | 1-5% regulation |
| Droop Adj. Max. (K-L Jumpered) | 875Hz., ± 75Hz. per 1.0 A change |
| Droop Adj. Min. (K-L Jumpered) | 15Hz., ± 6Hz. per 1.0 A change |
| Speed Trim Range | ± 200Hz. |
| Remote Variable Speed Range | 500 -7.5Hz. or any part thereof |
| Terminal Sensitivity | J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance |
| L: 735Hz., ± 60Hz/Volt @ 65 K Impedance | |
| N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance | |
| P: 10V DC Supply @ 20ma Max. | |
| Speed Switch Adjustment Range | 1000-10000Hz. |
| ENVIRONMENTAL | |
| Ambient Operating Temperature Range | -40°c to +85°c |
| Relative Humidity | up to 95% |
| Storage Temperature | -55°c ~ 90°c |
| Shock | 20-100HZ 500mm/Sec. |
| INPUT POWER | |
| Supply | 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) |
| Polarity | Negative Ground(Case Isolated) |
| Power Consumption | 50mA continuous plus actuator current |
| Maximum Actuator Current at 25 | 10Amps continuous |
| Speed Sensor Signal | 0.5-120 Volts RMS |
| PHYSICAL | |
| Weight | 630g |
