Introduce

Product：

User manual：

Software Download：

Product description：

CE3044195 generator speed control board for PT (G)-type fuel system for Cummins N, K series diesel generator sets. 500KW normally closed for the following units. CE3044195 speed controller is a fully electronic closed loop control of design, it is for the moment the load changes with fast and accurate response to control engine speed, when the normally closed EFC Series electronic actuator and magnetic speed sensor is connected to the matching when the signal can be perfectly controlled Cummins engines. 

Main features:

1、 using loop control circuit design; 

2、 excellent steady-state and dynamic control performance, cost-effective; 

3、 the steady-state rate of 1-5% adjustable tone; small speed fluctuation rate ≤ ± 0.25%; 

4、a rich and flexible speed control interface; 

5、12 V/24V two voltage may be normal and reliable operation.ections for a remote speed POT

Specifications：

Input

        Supply： 24 VDC ±20%

Polarity： Negative Ground (Case Isolated)

Power Consumption： 40 MA 

Maximum Actuator Current： 4.5 A continuous

Speed Sensor Signal： 2-120 Volts RMS

Performance

Isochronous Operation/Steady State Stability： ±0.25% or better

Speed Range/Governor： 1K to 6.5K Hz continuous

Speed Drift with Temperature： ±1 Max

Idle Regulation： 260±20 Hz

Droop Adj. Max.： 400 Hz., ±75Hz. Per 1.0A change

Speed Trim Range： ±200 Hz with 1 ohm connected

Remote Variable Speed Range： 25 to 100% of rated speed

Impedance： 1m ohms

Environmental

        Ambient Operating Temperature Range： -40 to +85 Deg. C

Relative Humidity： Up to 95%

All Surface Finishes： Fungus Proof and Corrosion Resitant

Reliability

        Vibration： 20 to 100 Hz. 500mm/sec