Your position: > Technical > FAQ >

Diesel generator oil pump for oil is what reason?

2014-11-26 10:47      Click:


The basis of a diesel generator set for fuel pump to adjust


According to the exhaust gas temperature, pressure of each cylinder or smoked to determine its actual working condition and the degree of diesel engine and to determine the cylinder oil too much or too little, fuel supply time too early or too late, and then to adjust.Through an appropriate adjustment of each cylinder oil and fuel supply time, let the fuel injection pump for each cylinder diesel engine according to the principle of to each according to his need to oil supply, to eliminate the differences in each cylinder actually exist.


To start the diesel generator pump oiling the main reasons are as follows:

1. Poor oil pump assembly or reverse;

2. The oil pump joke not tightly into the air;

3. Brook imprecision of tubing system leak;

4. The suction pipe line blocked;

5. The oil pump of the stuffing box is not tight;

6. Oil filter clogging or oil suction check valve failure;

7. Oil tank too little.


Method:

1. Check the oil pump repair;

2. Cleaning repair oil filter, oil suction valve and pipe line;

3. Eliminate the blurred, avoid air leakage;

4. Discharge tubing absorption by the loading method and the air in the oil pump;

5. The interior of the tank in a certain oil level height.


Dongguan Tuancheng automation equipment Co., Ltd. all rights reserved.
Sales Phone: 86-769-23162896 Fax:86-769-23162896-609、23166296