Your position: > Technical > FAQ >

Simple generator AVR wiring diagram

2014-11-28 15:47      Click:


Simple generator AVR is dedicated to simple generator voltage regulation.Simple generator wiring diagram, the structure and working principle of generator usually consists of the stator, rotor, end cover and bearing components.By the stator core, stator line winding, stand and fixed the parts of other structures.Rotor by the rotor core (or a magnetic pole, the conjugate) winding, retaining rings, central ring, slip ring, fan and shaft parts.By bearing and end cover of generator stator and rotor connected together, can make the rotor spinning in the stator, do the exercise cutting lines, thus induced potential, through terminal lead, in the circuit, the electric current is produced.Exactly alternating current (ac) can't be stored directly, but it can be stored in other ways.Alternating current (ac) can through the rectifier into direct current (dc), filling the storage battery, when need is converted to an alternating current by inverter.Power plant of electricity in unit time is certain, it is hard to store and alternating current (ac).In peak electricity power load is too large, affect the normal operation of the power plant power supply equipment, and low, because of electricity load decreases, alternating current (ac) and cannot be stored directly, causing electric large waste from power plants.Form a peak electricity use, low electric squandered.In order to solve this contradiction, so the state encourages the low power consumption.Part of transfer of peak load to low.Here is a simple generator AVR wiring diagram:



Dongguan Tuancheng automation equipment Co., Ltd. all rights reserved.
Sales Phone: 86-769-23162896 Fax:86-769-23162896-609、23166296