ADB225-12VGenerator actuator
- publish： 2014-02-19 08:48 Browse：
- Type： ADB225-12V
- Product Summary：
ADB225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi voltage usage, wider rotation angles, and proven reliability. The actuator can operate d...
Product description:
ADB225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24 volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides more stable and rapid response to transient conditions. Applications include most block pumps, with or without mechanical governors, distributor type pumps, and medium sized carbureted engines. The 25 degrees of rotation expands the application to a wider variety of engines.
Specifications：
| Power Input | Operating Voltage | 12, 24, or 32 VDC |
| Normal operating Current | 1.5 A at 24/32VDC | |
| Maximum Current-Continuously Rated | 4A at 24V/ 32 VDC | |
| Performance | Available Torque | Max 2.2 ib-ft (2.7Nm) |
| Maximum operating shaft Augular travel | 25± 1 degree CW/CCW | |
| Environmental | Temperature Range | -65 to + 200°F(-54° to +95 °C) |
| Relative Humidity | Up to 100% | |
| All Surface Finishes | Fungus Proof and Corrosion Resitant | |
| Reliability | Vibration | up to 20 G 100 50-500 Hz. |
| Testing | 100% Tested | |
| physical | Dimensions | See Diagram 1 |
| Weigh1 | 8.25 lbs.(3.75kg) | |
| Mounting | Any position, Vertical Preferred | |
| Mating Hardware | Connector ACB 225/ADB 225 | EC 1000/ MS3106R 14S-6S (6 pins) |
| Connector ADC 225 | Supplied with Actuator | |
| Lever ACB 225/ ADB 225/ADC225S | LE 1400-2 | |
| Lever ADC225 | LE 1500-2 | |
| Rod End Bearings (to attach a 1/4-28THD linkage rod to the lever) | BR 200(right hand) / BR201 (left hand) | |
| wiring harness ADC225 | Supplied with Actuator | |
| wiring harness ACB225/ ADB225 | Various Lengths availale from GAC | |
